Wash Hydro • Shop Online
2318 18th Street NW
Washington, DC
(202)-750-7760
About Us In-Store
Workshops
Employment Customer Rewards Customer Feedback Employee Login Open Monday-Saturday 10am-8pm, Sundays 12pm-6pm
24 Items Found.Viewing Page 1 of 3 Next Page >> Sort by
Type: Miscellaneous
Subtype: Movers/Support
GroXcess Rope Ratchet® suspension systems provide nearly effortless support to a heavy grow light or other piece of equipment. These 1/8-inch GroXcess Rope Ratchet systems support up to 75 pounds individually and a total of 150 pounds per pair. Six-foot lengths of rope are pre-fed through the ratchets for easy height adjustment without tying and untying knots. Included carabiners easily connect and disconnect equipment. Each Rope Ratchet unit also serves as a tie-down system and is handy for countless garden and non-garden uses. Pack of two.
Type: Miscellaneous
Subtype: Movers/Support
The GroXcess Rope Ratchet® heavy-duty suspension system provides nearly effortless support to even the heaviest grow light or other piece of equipment. The 1/4-inch GroXcess Rope Ratchet supports up to 150 pounds. An 8-foot length of rope is pre-fed through the ratchet for easy height adjustment without tying and untying knots. The included carabiner easily connects and disconnects equipment. Two 1/4-inch Rope Ratchets are needed for most suspension applications. Also serves as a tie-down system and is handy for countless non-garden uses.
Type: Miscellaneous
Subtype: Movers/Support
LightRail® Auxiliary Rail is used with LightRail 5.0 and a second Add-A-Bar Kit to accommodate a three crossbar system. The LightRail 5.0 Auxiliary Rail Item is packed in a tube with installation hardware and instructions. The LightRail 5.0 Auxiliary Rail does not need rail alignment pins because travel across the seam will not be necessary.
Type: Miscellaneous
Subtype: Movers/Support
LightRail® Add-A-Bar Kit for LightRail 5.0 is for adding a second crossbar that extends to 81, 87, or 93 inches. Comes with an LR5 Auxiliary Trolley, crossbar, push-pull rod, mounting hardware and instructions.
Type: Miscellaneous
Subtype: Movers/Support
The LightRail® 5.0 Side by Side Kit can move multiple lights with each crossbar allowing lights to travel side by side, and it has a zero-to-60-second adjustable time delay for pausing the lamp at the end of each run. The time delay helps promote even growth from end to end and allows for equal light-time for the entire run. From its triple-duty extruded aluminum track, wide and stable carriage with steel-on-steel carrier bearings, to the high-torque, 4 RPM instrument-grade drive motor with ball bearing output shaft and sure-grip dual drive design, LightRail 5.0 is more than capable of moving two or three lights side by side or fore and aft per cross bar. The LightRail 5.0 Kit comes with a LR5 drive motor, one crossbar, instructions, mounting hardware and a two-section 8-foot rail. LightRail 5.0 will move any light and any hood, multiple sizes and weights and is a scalable system that can move up to nine lights (or six lights to accommodate larger reflectors) with a single motor. Limited life-time warranty. Replacement motor available.
Type: Miscellaneous
Subtype: Movers/Support
LightRail® 4.0 AdjustaDrive 6-to-10-RPM Motor features both a zero-to-60-second adjustable time delay for promoting even growth from end to end plus the added feature of 2 to 4 feet per minute adjustable speed control that covers a wide range of lamp intensities and travel distances. Great for additional control, it comes complete with installation hardware and instructions.
Type: Miscellaneous
Subtype: Movers/Support
LightRail® Extreme Duty Trolley Wheels are a suggested upgrade item for moving multiple lights or heavier loads such as heavier LED, plasma or any light weighing 35 pounds or more. They are engineered with steel on steel ball bearing with a nylon over molded tire for smooth quiet operation. Rated up to 60 pounds per set and come with a lifetime warranty.
Type: Miscellaneous
Subtype: Movers/Support
The LightRail® Hanger Brackets Kit, exclusive to LightRail 3, 3.5 and 4.0, allow for easy rail hanging in grow tents. Sold in packs of 4 complete with instructions and zip ties.
Type: Miscellaneous
Subtype: Movers/Support
The LightRail® Switch Stops, exclusive to LightRail 3.0, 3.5, 4.0 and 4.20, are used on the rail at desired lamp travel switching points. They are packaged in one set of 2 each – slide nuts and thumb screws.
Type: Miscellaneous
Subtype: Movers/Support
The LightRail® 4.0 AdjustaDrive Kit comes complete with a variable speed motor and a two-piece 6-foot and 6-inch rail, installation hardware and instructions. With both a zero-to-60-second adjustable time delay for promoting even growth from end to end plus the added feature of two to four feet per minute adjustable speed control that covers a wide range of lamp intensities and travel distances, LightRail 4.0 is great for additional control. LightRail 4.0 will move any light and any hood, multiple sizes and weights and is a scalable system. Product includes a two-year warranty.